| Author |
Message |
Charles de la Sablonniere
Guest
|
 Posted:
Sat Oct 22, 2005 4:27 pm Post subject:
French accented characters not displaying in program guide |
|
|
Hi,
I have MCE 2005, and the only problem I'm having with it is that all
french accented characters are not displaying properly in the program
guide.
For example, the EAcute(é) is always displaying as a comma, the
EGrave(è) as a SCaron(Š)...
Anybody has an idea of how I can fix this?
TIA
Charles |
|
| Back to top |
|
 |
Michel Bordeleau [MCE-MVP
Guest
|
| Posted:
Sun Oct 23, 2005 12:28 am Post subject:
Re: French accented characters not displaying in program gui |
|
|
Bonjour Charles,
I have noticed this today as well. This was a problem in the past but I'm
pretty sure it was fixed. I have already brought this up with some folks at
Microsoft, but you can file a report at
http://www.microsoft.com/windowsxp/mediacenter/using/guidesubmit.mspx
--
Michel Bordeleau
MS-MVP - Windows XP Media Center Edition
(remove oogle from email address to email me)
"Charles de la Sablonniere" <delasablonnierec_NOSPAM_@ca.objectiflune.com>
wrote in message news:eiz1esx1FHA.664@tk2msftngp13.phx.gbl...
| Quote: |
Hi,
I have MCE 2005, and the only problem I'm having with it is that all
french accented characters are not displaying properly in the program
guide.
For example, the EAcute(é) is always displaying as a comma, the
EGrave(è) as a SCaron(S)...
Anybody has an idea of how I can fix this?
TIA
Charles |
|
|
| Back to top |
|
|
Michel Bordeleau [MCE-MVP
Guest
|
| Posted:
Fri Oct 28, 2005 12:28 am Post subject:
Re: French accented characters not displaying in program gui |
|
|
Just to let you know that Microsoft has been made aware of this issue and
they are looking into it.
--
Michel Bordeleau
MS-MVP - Windows XP Media Center Edition
(remove oogle from email address to email me)
"Charles de la Sablonniere" <delasablonnierec_NOSPAM_@ca.objectiflune.com>
wrote in message news:eiz1esx1FHA.664@tk2msftngp13.phx.gbl...
| Quote: |
Hi,
I have MCE 2005, and the only problem I'm having with it is that all
french accented characters are not displaying properly in the program
guide.
For example, the EAcute(é) is always displaying as a comma, the
EGrave(è) as a SCaron(S)...
Anybody has an idea of how I can fix this?
TIA
Charles |
|
|
| Back to top |
|
|
Chris Hill [MSFT]
Guest
|
| Posted:
Sat Oct 29, 2005 6:08 am Post subject:
Re: French accented characters not displaying in program gui |
|
|
Hi Charles,
This issue should be showing as corrected on 1/11. If it still repros for
you after that date please post a response here.
Thank you!
Chris Hill
Windows Media
Please do not send e-mail directly to this alias. This address is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
| Quote: | From: "Michel Bordeleau [MCE-MVP]" <Michel.mcemvp@googlemail.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
Subject: Re: French accented characters not displaying in program guide
Date: Thu, 27 Oct 2005 17:29:08 -0400
Lines: 28
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2670
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2670
X-RFC2646: Format=Flowed; Original
Message-ID: <OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: modemcable209.143-202-24.mc.videotron.ca 24.202.143.209
Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP15.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.mediacenter:63420
X-Tomcat-NG: microsoft.public.windows.mediacenter
Just to let you know that Microsoft has been made aware of this issue and
they are looking into it.
--
Michel Bordeleau
MS-MVP - Windows XP Media Center Edition
(remove oogle from email address to email me)
"Charles de la Sablonniere"
delasablonnierec_NOSPAM_@ca.objectiflune.com
wrote in message news:eiz1esx1FHA.664@tk2msftngp13.phx.gbl...
Hi,
I have MCE 2005, and the only problem I'm having with it is that all
french accented characters are not displaying properly in the program
guide.
For example, the EAcute(é) is always displaying as a comma, the
EGrave(è) as a SCaron(S)...
Anybody has an idea of how I can fix this?
TIA
Charles
|
|
|
| Back to top |
|
|
Claude
Guest
|
| Posted:
Wed Nov 02, 2005 5:27 pm Post subject:
Re: French accented characters not displaying in program gui |
|
|
Hi Chris,
I read this thread a couple of days ago without posting, just waiting for
11/1 for an improvement on that problem that I am also experiencing.
Unfortunately, today 11/2 I still have the same problem. I tried to
reinitialize the guide without improvement. I don't see any patch on
download.microsoft.com.
Claude
""Chris Hill [MSFT]"" wrote:
| Quote: | Hi Charles,
This issue should be showing as corrected on 1/11. If it still repros for
you after that date please post a response here.
Thank you!
Chris Hill
Windows Media
Please do not send e-mail directly to this alias. This address is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
From: "Michel Bordeleau [MCE-MVP]" <Michel.mcemvp@googlemail.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
Subject: Re: French accented characters not displaying in program guide
Date: Thu, 27 Oct 2005 17:29:08 -0400
Lines: 28
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2670
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2670
X-RFC2646: Format=Flowed; Original
Message-ID: <OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: modemcable209.143-202-24.mc.videotron.ca 24.202.143.209
Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP15.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.mediacenter:63420
X-Tomcat-NG: microsoft.public.windows.mediacenter
Just to let you know that Microsoft has been made aware of this issue and
they are looking into it.
--
Michel Bordeleau
MS-MVP - Windows XP Media Center Edition
(remove oogle from email address to email me)
"Charles de la Sablonniere"
delasablonnierec_NOSPAM_@ca.objectiflune.com
wrote in message news:eiz1esx1FHA.664@tk2msftngp13.phx.gbl...
Hi,
I have MCE 2005, and the only problem I'm having with it is that all
french accented characters are not displaying properly in the program
guide.
For example, the EAcute(é) is always displaying as a comma, the
EGrave(è) as a SCaron(S)...
Anybody has an idea of how I can fix this?
TIA
Charles
|
|
|
| Back to top |
|
|
Stéphane
Guest
|
| Posted:
Wed Nov 02, 2005 5:27 pm Post subject:
Re: French accented characters not displaying in program gui |
|
|
Hi,
I still have that problem too. Are you going to release a patch or fix
something on your side? Thank you.
Stéphane
"Claude" wrote:
| Quote: | Hi Chris,
I read this thread a couple of days ago without posting, just waiting for
11/1 for an improvement on that problem that I am also experiencing.
Unfortunately, today 11/2 I still have the same problem. I tried to
reinitialize the guide without improvement. I don't see any patch on
download.microsoft.com.
Claude
""Chris Hill [MSFT]"" wrote:
Hi Charles,
This issue should be showing as corrected on 1/11. If it still repros for
you after that date please post a response here.
Thank you!
Chris Hill
Windows Media
Please do not send e-mail directly to this alias. This address is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
From: "Michel Bordeleau [MCE-MVP]" <Michel.mcemvp@googlemail.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
Subject: Re: French accented characters not displaying in program guide
Date: Thu, 27 Oct 2005 17:29:08 -0400
Lines: 28
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2670
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2670
X-RFC2646: Format=Flowed; Original
Message-ID: <OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: modemcable209.143-202-24.mc.videotron.ca 24.202.143.209
Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP15.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.mediacenter:63420
X-Tomcat-NG: microsoft.public.windows.mediacenter
Just to let you know that Microsoft has been made aware of this issue and
they are looking into it.
--
Michel Bordeleau
MS-MVP - Windows XP Media Center Edition
(remove oogle from email address to email me)
"Charles de la Sablonniere"
delasablonnierec_NOSPAM_@ca.objectiflune.com
wrote in message news:eiz1esx1FHA.664@tk2msftngp13.phx.gbl...
Hi,
I have MCE 2005, and the only problem I'm having with it is that all
french accented characters are not displaying properly in the program
guide.
For example, the EAcute(é) is always displaying as a comma, the
EGrave(è) as a SCaron(S)...
Anybody has an idea of how I can fix this?
TIA
Charles
|
|
|
| Back to top |
|
|
Chris Hill [MSFT]
Guest
|
| Posted:
Wed Nov 02, 2005 11:57 pm Post subject:
Re: French accented characters not displaying in program gui |
|
|
Hi Folks,
I have good news and (kind of) Bad news about this.
Bad News: The cause of this has a larger impact than just the accented
characters being changed. Testing and Quality assurance has not signed off
on the solution. We will not be rolling out the solution until a full test
pass is done and all parties involved have signed off on it.
Good News: We know the cause and have a solution that is not only under
development but has the fix already done and checked in for testing. What
this means is that the issue is server side, not client so you will not
need to download any patches. It also means that I'm doing something right
with your feedback as everyone agrees its important.
Thank you for the feedback!
Chris
WMIS
Please do not send e-mail directly to this alias. This address is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
| Quote: | Thread-Topic: French accented characters not displaying in program guide
thread-index: AcXfsYrWzJ+uvoRqRYeKg7nV717cDg==
X-WBNR-Posting-Host: 24.200.233.157
From: =?Utf-8?B?U3TDqXBoYW5l?= <Stéphane@discussions.microsoft.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl |
<ALpNOVC3FHA.1144@TK2MSFTNGXA01.phx.gbl>
<E3B01011-3EA5-4838-A16A-F6B4A66A4797@microsoft.com>
| Quote: | Subject: Re: French accented characters not displaying in program guide
Date: Wed, 2 Nov 2005 05:30:08 -0800
Lines: 84
Message-ID: <7DE6270A-10A9-4DCE-A7E2-14AE7A2AC001@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 8bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA02.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.mediacenter:64308
X-Tomcat-NG: microsoft.public.windows.mediacenter
Hi,
I still have that problem too. Are you going to release a patch or fix
something on your side? Thank you.
Stéphane
"Claude" wrote:
Hi Chris,
I read this thread a couple of days ago without posting, just waiting
for
11/1 for an improvement on that problem that I am also experiencing.
Unfortunately, today 11/2 I still have the same problem. I tried to
reinitialize the guide without improvement. I don't see any patch on
download.microsoft.com.
Claude
""Chris Hill [MSFT]"" wrote:
Hi Charles,
This issue should be showing as corrected on 1/11. If it still
repros for
you after that date please post a response here.
Thank you!
Chris Hill
Windows Media
Please do not send e-mail directly to this alias. This address is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no
rights.
--------------------
From: "Michel Bordeleau [MCE-MVP]" <Michel.mcemvp@googlemail.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
Subject: Re: French accented characters not displaying in program
guide
Date: Thu, 27 Oct 2005 17:29:08 -0400
Lines: 28
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2670
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2670
X-RFC2646: Format=Flowed; Original
Message-ID: <OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: modemcable209.143-202-24.mc.videotron.ca
24.202.143.209
Path:
TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP15.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.windows.mediacenter:63420
X-Tomcat-NG: microsoft.public.windows.mediacenter
Just to let you know that Microsoft has been made aware of this
issue and
they are looking into it.
--
Michel Bordeleau
MS-MVP - Windows XP Media Center Edition
(remove oogle from email address to email me)
"Charles de la Sablonniere"
delasablonnierec_NOSPAM_@ca.objectiflune.com
wrote in message news:eiz1esx1FHA.664@tk2msftngp13.phx.gbl...
Hi,
I have MCE 2005, and the only problem I'm having with it is that
all
french accented characters are not displaying properly in the
program
guide.
For example, the EAcute(é) is always displaying as a comma, the
EGrave(è) as a SCaron(S)...
Anybody has an idea of how I can fix this?
TIA
Charles
|
|
|
| Back to top |
|
|
Dana Cline - MVP
Guest
|
| Posted:
Thu Nov 03, 2005 1:06 am Post subject:
Re: French accented characters not displaying in program gui |
|
|
Thanks for keeping us informed!
I assume if it's a server side problem, then one day it'll just Start
Working Right? Cool!
Dana Cline - MCE MVP
""Chris Hill [MSFT]"" <a-chill@microsoft.com> wrote in message
news:IeDy6b93FHA.2984@TK2MSFTNGXA01.phx.gbl...
| Quote: | Hi Folks,
I have good news and (kind of) Bad news about this.
Bad News: The cause of this has a larger impact than just the accented
characters being changed. Testing and Quality assurance has not signed
off
on the solution. We will not be rolling out the solution until a full
test
pass is done and all parties involved have signed off on it.
Good News: We know the cause and have a solution that is not only under
development but has the fix already done and checked in for testing. What
this means is that the issue is server side, not client so you will not
need to download any patches. It also means that I'm doing something
right
with your feedback as everyone agrees its important.
Thank you for the feedback!
Chris
WMIS
Please do not send e-mail directly to this alias. This address is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no
rights.
--------------------
Thread-Topic: French accented characters not displaying in program guide
thread-index: AcXfsYrWzJ+uvoRqRYeKg7nV717cDg==
X-WBNR-Posting-Host: 24.200.233.157
From: =?Utf-8?B?U3TDqXBoYW5l?= <Stéphane@discussions.microsoft.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
ALpNOVC3FHA.1144@TK2MSFTNGXA01.phx.gbl
E3B01011-3EA5-4838-A16A-F6B4A66A4797@microsoft.com
Subject: Re: French accented characters not displaying in program guide
Date: Wed, 2 Nov 2005 05:30:08 -0800
Lines: 84
Message-ID: <7DE6270A-10A9-4DCE-A7E2-14AE7A2AC001@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 8bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA02.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.mediacenter:64308
X-Tomcat-NG: microsoft.public.windows.mediacenter
Hi,
I still have that problem too. Are you going to release a patch or fix
something on your side? Thank you.
Stéphane
"Claude" wrote:
Hi Chris,
I read this thread a couple of days ago without posting, just waiting
for
11/1 for an improvement on that problem that I am also experiencing.
Unfortunately, today 11/2 I still have the same problem. I tried to
reinitialize the guide without improvement. I don't see any patch on
download.microsoft.com.
Claude
""Chris Hill [MSFT]"" wrote:
Hi Charles,
This issue should be showing as corrected on 1/11. If it still
repros for
you after that date please post a response here.
Thank you!
Chris Hill
Windows Media
Please do not send e-mail directly to this alias. This address is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no
rights.
--------------------
From: "Michel Bordeleau [MCE-MVP]" <Michel.mcemvp@googlemail.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
Subject: Re: French accented characters not displaying in program
guide
Date: Thu, 27 Oct 2005 17:29:08 -0400
Lines: 28
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2670
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2670
X-RFC2646: Format=Flowed; Original
Message-ID: <OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: modemcable209.143-202-24.mc.videotron.ca
24.202.143.209
Path:
TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP15.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.windows.mediacenter:63420
X-Tomcat-NG: microsoft.public.windows.mediacenter
Just to let you know that Microsoft has been made aware of this
issue and
they are looking into it.
--
Michel Bordeleau
MS-MVP - Windows XP Media Center Edition
(remove oogle from email address to email me)
"Charles de la Sablonniere"
delasablonnierec_NOSPAM_@ca.objectiflune.com
wrote in message news:eiz1esx1FHA.664@tk2msftngp13.phx.gbl...
Hi,
I have MCE 2005, and the only problem I'm having with it is that
all
french accented characters are not displaying properly in the
program
guide.
For example, the EAcute(é) is always displaying as a comma, the
EGrave(è) as a SCaron(S)...
Anybody has an idea of how I can fix this?
TIA
Charles
|
|
|
| Back to top |
|
|
Chris Hill [MSFT]
Guest
|
| Posted:
Sat Nov 05, 2005 1:28 am Post subject:
Re: French accented characters not displaying in program gui |
|
|
Hi Folks,
If this is happening can you please give me your postal code? We want to
have several examples to test with.
Chris Hill
Windows Media
Please do not send e-mail directly to this alias. This address is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
<ALpNOVC3FHA.1144@TK2MSFTNGXA01.phx.gbl>
<E3B01011-3EA5-4838-A16A-F6B4A66A4797@microsoft.com>
<7DE6270A-10A9-4DCE-A7E2-14AE7A2AC001@microsoft.com>
<IeDy6b93FHA.2984@TK2MSFTNGXA01.phx.gbl>
| Quote: | Subject: Re: French accented characters not displaying in program guide
Date: Wed, 2 Nov 2005 13:06:16 -0600
Lines: 162
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2180
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180
X-RFC2646: Format=Flowed; Original
Message-ID: <ONEZBC#3FHA.472@TK2MSFTNGP15.phx.gbl
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: 69.150.239.200
Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP15.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.mediacenter:64380
X-Tomcat-NG: microsoft.public.windows.mediacenter
Thanks for keeping us informed!
I assume if it's a server side problem, then one day it'll just Start
Working Right? Cool!
Dana Cline - MCE MVP
""Chris Hill [MSFT]"" <a-chill@microsoft.com> wrote in message
news:IeDy6b93FHA.2984@TK2MSFTNGXA01.phx.gbl...
Hi Folks,
I have good news and (kind of) Bad news about this.
Bad News: The cause of this has a larger impact than just the accented
characters being changed. Testing and Quality assurance has not signed
off
on the solution. We will not be rolling out the solution until a full
test
pass is done and all parties involved have signed off on it.
Good News: We know the cause and have a solution that is not only under
development but has the fix already done and checked in for testing.
What
this means is that the issue is server side, not client so you will not
need to download any patches. It also means that I'm doing something
right
with your feedback as everyone agrees its important.
Thank you for the feedback!
Chris
WMIS
Please do not send e-mail directly to this alias. This address is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no
rights.
--------------------
Thread-Topic: French accented characters not displaying in program
guide
thread-index: AcXfsYrWzJ+uvoRqRYeKg7nV717cDg==
X-WBNR-Posting-Host: 24.200.233.157
From: =?Utf-8?B?U3TDqXBoYW5l?= <Stéphane@discussions.microsoft.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
ALpNOVC3FHA.1144@TK2MSFTNGXA01.phx.gbl
E3B01011-3EA5-4838-A16A-F6B4A66A4797@microsoft.com
Subject: Re: French accented characters not displaying in program guide
Date: Wed, 2 Nov 2005 05:30:08 -0800
Lines: 84
Message-ID: <7DE6270A-10A9-4DCE-A7E2-14AE7A2AC001@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 8bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA02.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.mediacenter:64308
X-Tomcat-NG: microsoft.public.windows.mediacenter
Hi,
I still have that problem too. Are you going to release a patch or fix
something on your side? Thank you.
Stéphane
"Claude" wrote:
Hi Chris,
I read this thread a couple of days ago without posting, just waiting
for
11/1 for an improvement on that problem that I am also experiencing.
Unfortunately, today 11/2 I still have the same problem. I tried to
reinitialize the guide without improvement. I don't see any patch on
download.microsoft.com.
Claude
""Chris Hill [MSFT]"" wrote:
Hi Charles,
This issue should be showing as corrected on 1/11. If it still
repros for
you after that date please post a response here.
Thank you!
Chris Hill
Windows Media
Please do not send e-mail directly to this alias. This address is
for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no
rights.
--------------------
From: "Michel Bordeleau [MCE-MVP]" <Michel.mcemvp@googlemail.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
Subject: Re: French accented characters not displaying in program
guide
Date: Thu, 27 Oct 2005 17:29:08 -0400
Lines: 28
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2670
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2670
X-RFC2646: Format=Flowed; Original
Message-ID: <OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: modemcable209.143-202-24.mc.videotron.ca
24.202.143.209
Path:
TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP15.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.windows.mediacenter:63420
X-Tomcat-NG: microsoft.public.windows.mediacenter
Just to let you know that Microsoft has been made aware of this
issue and
they are looking into it.
--
Michel Bordeleau
MS-MVP - Windows XP Media Center Edition
(remove oogle from email address to email me)
"Charles de la Sablonniere"
delasablonnierec_NOSPAM_@ca.objectiflune.com
wrote in message news:eiz1esx1FHA.664@tk2msftngp13.phx.gbl...
Hi,
I have MCE 2005, and the only problem I'm having with it is
that
all
french accented characters are not displaying properly in the
program
guide.
For example, the EAcute(é) is always displaying as a comma,
the
EGrave(è) as a SCaron(S)...
Anybody has an idea of how I can fix this?
TIA
Charles
|
|
|
| Back to top |
|
|
Stéphane
Guest
|
| Posted:
Sat Nov 05, 2005 9:27 am Post subject:
Re: French accented characters not displaying in program gui |
|
|
Hi, I have problems with accents.
My postal code is : J5Z4C7
My provider is : Montréal Vidéotron, Cable
Thank you very much for your support!
Stéphane
""Chris Hill [MSFT]"" wrote:
| Quote: | Hi Folks,
If this is happening can you please give me your postal code? We want to
have several examples to test with.
Chris Hill
Windows Media
Please do not send e-mail directly to this alias. This address is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
From: "Dana Cline - MVP" <dcline@scriptpro.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
ALpNOVC3FHA.1144@TK2MSFTNGXA01.phx.gbl
E3B01011-3EA5-4838-A16A-F6B4A66A4797@microsoft.com
7DE6270A-10A9-4DCE-A7E2-14AE7A2AC001@microsoft.com
IeDy6b93FHA.2984@TK2MSFTNGXA01.phx.gbl
Subject: Re: French accented characters not displaying in program guide
Date: Wed, 2 Nov 2005 13:06:16 -0600
Lines: 162
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2180
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180
X-RFC2646: Format=Flowed; Original
Message-ID: <ONEZBC#3FHA.472@TK2MSFTNGP15.phx.gbl
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: 69.150.239.200
Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP15.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.mediacenter:64380
X-Tomcat-NG: microsoft.public.windows.mediacenter
Thanks for keeping us informed!
I assume if it's a server side problem, then one day it'll just Start
Working Right? Cool!
Dana Cline - MCE MVP
""Chris Hill [MSFT]"" <a-chill@microsoft.com> wrote in message
news:IeDy6b93FHA.2984@TK2MSFTNGXA01.phx.gbl...
Hi Folks,
I have good news and (kind of) Bad news about this.
Bad News: The cause of this has a larger impact than just the accented
characters being changed. Testing and Quality assurance has not signed
off
on the solution. We will not be rolling out the solution until a full
test
pass is done and all parties involved have signed off on it.
Good News: We know the cause and have a solution that is not only under
development but has the fix already done and checked in for testing.
What
this means is that the issue is server side, not client so you will not
need to download any patches. It also means that I'm doing something
right
with your feedback as everyone agrees its important.
Thank you for the feedback!
Chris
WMIS
Please do not send e-mail directly to this alias. This address is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no
rights.
--------------------
Thread-Topic: French accented characters not displaying in program
guide
thread-index: AcXfsYrWzJ+uvoRqRYeKg7nV717cDg==
X-WBNR-Posting-Host: 24.200.233.157
From: =?Utf-8?B?U3TDqXBoYW5l?= <Stéphane@discussions.microsoft.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
ALpNOVC3FHA.1144@TK2MSFTNGXA01.phx.gbl
E3B01011-3EA5-4838-A16A-F6B4A66A4797@microsoft.com
Subject: Re: French accented characters not displaying in program guide
Date: Wed, 2 Nov 2005 05:30:08 -0800
Lines: 84
Message-ID: <7DE6270A-10A9-4DCE-A7E2-14AE7A2AC001@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 8bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA02.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.mediacenter:64308
X-Tomcat-NG: microsoft.public.windows.mediacenter
Hi,
I still have that problem too. Are you going to release a patch or fix
something on your side? Thank you.
Stéphane
"Claude" wrote:
Hi Chris,
I read this thread a couple of days ago without posting, just waiting
for
11/1 for an improvement on that problem that I am also experiencing.
Unfortunately, today 11/2 I still have the same problem. I tried to
reinitialize the guide without improvement. I don't see any patch on
download.microsoft.com.
Claude
""Chris Hill [MSFT]"" wrote:
Hi Charles,
This issue should be showing as corrected on 1/11. If it still
repros for
you after that date please post a response here.
Thank you!
Chris Hill
Windows Media
Please do not send e-mail directly to this alias. This address is
for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no
rights.
--------------------
From: "Michel Bordeleau [MCE-MVP]" <Michel.mcemvp@googlemail.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
Subject: Re: French accented characters not displaying in program
guide
Date: Thu, 27 Oct 2005 17:29:08 -0400
Lines: 28
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2670
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2670
X-RFC2646: Format=Flowed; Original
Message-ID: <OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: modemcable209.143-202-24.mc.videotron.ca
24.202.143.209
Path:
TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP15.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.windows.mediacenter:63420
X-Tomcat-NG: microsoft.public.windows.mediacenter
Just to let you know that Microsoft has been made aware of this
issue and
they are looking into it.
--
Michel Bordeleau
MS-MVP - Windows XP Media Center Edition
(remove oogle from email address to email me)
"Charles de la Sablonniere"
delasablonnierec_NOSPAM_@ca.objectiflune.com
wrote in message news:eiz1esx1FHA.664@tk2msftngp13.phx.gbl...
Hi,
I have MCE 2005, and the only problem I'm having with it is
that
all
french accented characters are not displaying properly in the
program
guide.
For example, the EAcute(é) is always displaying as a comma,
the
EGrave(è) as a SCaron(S)...
Anybody has an idea of how I can fix this?
TIA
Charles
|
|
|
| Back to top |
|
|
Phil St-Amour
Guest
|
| Posted:
Sat Nov 05, 2005 5:27 pm Post subject:
Re: French accented characters not displaying in program gui |
|
|
French accented characters do not display properly in the program guide.
Postal code: K2G 5A9
Cable provider: Rogers Cable (not digital)
Thanks,
Phil in Ottawa, Ontario, Canada
| Quote: | Hi Folks,
If this is happening can you please give me your postal code? We want to
have several examples to test with.
Chris Hill
Windows Media
Please do not send e-mail directly to this alias. This address is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no
rights.
-------------------- |
|
|
| Back to top |
|
|
Eric Litvak
Guest
|
| Posted:
Sat Nov 05, 2005 5:27 pm Post subject:
Re: French accented characters not displaying in program gui |
|
|
Same problem in H2S 3A8, Montreal, with Videotron analog cable.
""Chris Hill [MSFT]"" <a-chill@microsoft.com> wrote in message
news:lto3AJZ4FHA.3936@TK2MSFTNGXA01.phx.gbl...
| Quote: | Hi Folks,
If this is happening can you please give me your postal code? We want to
have several examples to test with.
Chris Hill
Windows Media
Please do not send e-mail directly to this alias. This address is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no
rights.
--------------------
From: "Dana Cline - MVP" <dcline@scriptpro.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
ALpNOVC3FHA.1144@TK2MSFTNGXA01.phx.gbl
E3B01011-3EA5-4838-A16A-F6B4A66A4797@microsoft.com
7DE6270A-10A9-4DCE-A7E2-14AE7A2AC001@microsoft.com
IeDy6b93FHA.2984@TK2MSFTNGXA01.phx.gbl
Subject: Re: French accented characters not displaying in program guide
Date: Wed, 2 Nov 2005 13:06:16 -0600
Lines: 162
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2180
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180
X-RFC2646: Format=Flowed; Original
Message-ID: <ONEZBC#3FHA.472@TK2MSFTNGP15.phx.gbl
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: 69.150.239.200
Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP15.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.mediacenter:64380
X-Tomcat-NG: microsoft.public.windows.mediacenter
Thanks for keeping us informed!
I assume if it's a server side problem, then one day it'll just Start
Working Right? Cool!
Dana Cline - MCE MVP
""Chris Hill [MSFT]"" <a-chill@microsoft.com> wrote in message
news:IeDy6b93FHA.2984@TK2MSFTNGXA01.phx.gbl...
Hi Folks,
I have good news and (kind of) Bad news about this.
Bad News: The cause of this has a larger impact than just the accented
characters being changed. Testing and Quality assurance has not signed
off
on the solution. We will not be rolling out the solution until a full
test
pass is done and all parties involved have signed off on it.
Good News: We know the cause and have a solution that is not only under
development but has the fix already done and checked in for testing.
What
this means is that the issue is server side, not client so you will not
need to download any patches. It also means that I'm doing something
right
with your feedback as everyone agrees its important.
Thank you for the feedback!
Chris
WMIS
Please do not send e-mail directly to this alias. This address is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no
rights.
--------------------
Thread-Topic: French accented characters not displaying in program
guide
thread-index: AcXfsYrWzJ+uvoRqRYeKg7nV717cDg==
X-WBNR-Posting-Host: 24.200.233.157
From: =?Utf-8?B?U3TDqXBoYW5l?= <Stéphane@discussions.microsoft.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
ALpNOVC3FHA.1144@TK2MSFTNGXA01.phx.gbl
E3B01011-3EA5-4838-A16A-F6B4A66A4797@microsoft.com
Subject: Re: French accented characters not displaying in program
guide
Date: Wed, 2 Nov 2005 05:30:08 -0800
Lines: 84
Message-ID: <7DE6270A-10A9-4DCE-A7E2-14AE7A2AC001@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 8bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
Path:
TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA02.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.mediacenter:64308
X-Tomcat-NG: microsoft.public.windows.mediacenter
Hi,
I still have that problem too. Are you going to release a patch or
fix
something on your side? Thank you.
Stéphane
"Claude" wrote:
Hi Chris,
I read this thread a couple of days ago without posting, just
waiting
for
11/1 for an improvement on that problem that I am also experiencing.
Unfortunately, today 11/2 I still have the same problem. I tried to
reinitialize the guide without improvement. I don't see any patch on
download.microsoft.com.
Claude
""Chris Hill [MSFT]"" wrote:
Hi Charles,
This issue should be showing as corrected on 1/11. If it still
repros for
you after that date please post a response here.
Thank you!
Chris Hill
Windows Media
Please do not send e-mail directly to this alias. This address is
for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers
no
rights.
--------------------
From: "Michel Bordeleau [MCE-MVP]"
Michel.mcemvp@googlemail.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
Subject: Re: French accented characters not displaying in
program
guide
Date: Thu, 27 Oct 2005 17:29:08 -0400
Lines: 28
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2670
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2670
X-RFC2646: Format=Flowed; Original
Message-ID: <OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: modemcable209.143-202-24.mc.videotron.ca
24.202.143.209
Path:
TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP15.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.windows.mediacenter:63420
X-Tomcat-NG: microsoft.public.windows.mediacenter
Just to let you know that Microsoft has been made aware of this
issue and
they are looking into it.
--
Michel Bordeleau
MS-MVP - Windows XP Media Center Edition
(remove oogle from email address to email me)
"Charles de la Sablonniere"
delasablonnierec_NOSPAM_@ca.objectiflune.com
wrote in message news:eiz1esx1FHA.664@tk2msftngp13.phx.gbl...
Hi,
I have MCE 2005, and the only problem I'm having with it is
that
all
french accented characters are not displaying properly in the
program
guide.
For example, the EAcute(é) is always displaying as a comma,
the
EGrave(è) as a SCaron(S)...
Anybody has an idea of how I can fix this?
TIA
Charles
|
|
|
| Back to top |
|
|
dnlmln
Guest
|
| Posted:
Sun Nov 06, 2005 1:28 am Post subject:
Re: French accented characters not displaying in program gui |
|
|
Accented character problems here too.
Postal Code: H8Z 1K3
Provider: Montreal Videotron, Cable
""Chris Hill [MSFT]"" wrote:
| Quote: | Hi Folks,
If this is happening can you please give me your postal code? We want to
have several examples to test with.
Chris Hill
Windows Media
Please do not send e-mail directly to this alias. This address is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
From: "Dana Cline - MVP" <dcline@scriptpro.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
ALpNOVC3FHA.1144@TK2MSFTNGXA01.phx.gbl
E3B01011-3EA5-4838-A16A-F6B4A66A4797@microsoft.com
7DE6270A-10A9-4DCE-A7E2-14AE7A2AC001@microsoft.com
IeDy6b93FHA.2984@TK2MSFTNGXA01.phx.gbl
Subject: Re: French accented characters not displaying in program guide
Date: Wed, 2 Nov 2005 13:06:16 -0600
Lines: 162
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2180
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180
X-RFC2646: Format=Flowed; Original
Message-ID: <ONEZBC#3FHA.472@TK2MSFTNGP15.phx.gbl
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: 69.150.239.200
Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP15.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.mediacenter:64380
X-Tomcat-NG: microsoft.public.windows.mediacenter
Thanks for keeping us informed!
I assume if it's a server side problem, then one day it'll just Start
Working Right? Cool!
Dana Cline - MCE MVP
""Chris Hill [MSFT]"" <a-chill@microsoft.com> wrote in message
news:IeDy6b93FHA.2984@TK2MSFTNGXA01.phx.gbl...
Hi Folks,
I have good news and (kind of) Bad news about this.
Bad News: The cause of this has a larger impact than just the accented
characters being changed. Testing and Quality assurance has not signed
off
on the solution. We will not be rolling out the solution until a full
test
pass is done and all parties involved have signed off on it.
Good News: We know the cause and have a solution that is not only under
development but has the fix already done and checked in for testing.
What
this means is that the issue is server side, not client so you will not
need to download any patches. It also means that I'm doing something
right
with your feedback as everyone agrees its important.
Thank you for the feedback!
Chris
WMIS
Please do not send e-mail directly to this alias. This address is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no
rights.
--------------------
Thread-Topic: French accented characters not displaying in program
guide
thread-index: AcXfsYrWzJ+uvoRqRYeKg7nV717cDg==
X-WBNR-Posting-Host: 24.200.233.157
From: =?Utf-8?B?U3TDqXBoYW5l?= <Stéphane@discussions.microsoft.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
ALpNOVC3FHA.1144@TK2MSFTNGXA01.phx.gbl
E3B01011-3EA5-4838-A16A-F6B4A66A4797@microsoft.com
Subject: Re: French accented characters not displaying in program guide
Date: Wed, 2 Nov 2005 05:30:08 -0800
Lines: 84
Message-ID: <7DE6270A-10A9-4DCE-A7E2-14AE7A2AC001@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 8bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA02.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.mediacenter:64308
X-Tomcat-NG: microsoft.public.windows.mediacenter
Hi,
I still have that problem too. Are you going to release a patch or fix
something on your side? Thank you.
Stéphane
"Claude" wrote:
Hi Chris,
I read this thread a couple of days ago without posting, just waiting
for
11/1 for an improvement on that problem that I am also experiencing.
Unfortunately, today 11/2 I still have the same problem. I tried to
reinitialize the guide without improvement. I don't see any patch on
download.microsoft.com.
Claude
""Chris Hill [MSFT]"" wrote:
Hi Charles,
This issue should be showing as corrected on 1/11. If it still
repros for
you after that date please post a response here.
Thank you!
Chris Hill
Windows Media
Please do not send e-mail directly to this alias. This address is
for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no
rights.
--------------------
From: "Michel Bordeleau [MCE-MVP]" <Michel.mcemvp@googlemail.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
Subject: Re: French accented characters not displaying in program
guide
Date: Thu, 27 Oct 2005 17:29:08 -0400
Lines: 28
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2670
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2670
X-RFC2646: Format=Flowed; Original
Message-ID: <OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: modemcable209.143-202-24.mc.videotron.ca
24.202.143.209
Path:
TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP15.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.windows.mediacenter:63420
X-Tomcat-NG: microsoft.public.windows.mediacenter
Just to let you know that Microsoft has been made aware of this
issue and
they are looking into it.
--
Michel Bordeleau
MS-MVP - Windows XP Media Center Edition
(remove oogle from email address to email me)
"Charles de la Sablonniere"
delasablonnierec_NOSPAM_@ca.objectiflune.com
wrote in message news:eiz1esx1FHA.664@tk2msftngp13.phx.gbl...
Hi,
I have MCE 2005, and the only problem I'm having with it is
that
all
french accented characters are not displaying properly in the
program
guide.
For example, the EAcute(é) is always displaying as a comma,
the
EGrave(è) as a SCaron(S)...
Anybody has an idea of how I can fix this?
TIA
Charles
|
|
|
| Back to top |
|
|
Risk
Guest
|
| Posted:
Sun Nov 06, 2005 7:31 am Post subject:
Re: French accented characters not displaying in program gui |
|
|
Hi, I have problems with accents.
My postal code is : H2G 2T7
My provider is : Canada (East), Bell ExpressVu (Digital)
Thanks for all !
""Chris Hill [MSFT]"" wrote:
| Quote: | Hi Folks,
If this is happening can you please give me your postal code? We want to
have several examples to test with.
Chris Hill
Windows Media
Please do not send e-mail directly to this alias. This address is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
From: "Dana Cline - MVP" <dcline@scriptpro.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
ALpNOVC3FHA.1144@TK2MSFTNGXA01.phx.gbl
E3B01011-3EA5-4838-A16A-F6B4A66A4797@microsoft.com
7DE6270A-10A9-4DCE-A7E2-14AE7A2AC001@microsoft.com
IeDy6b93FHA.2984@TK2MSFTNGXA01.phx.gbl
Subject: Re: French accented characters not displaying in program guide
Date: Wed, 2 Nov 2005 13:06:16 -0600
Lines: 162
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2180
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180
X-RFC2646: Format=Flowed; Original
Message-ID: <ONEZBC#3FHA.472@TK2MSFTNGP15.phx.gbl
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: 69.150.239.200
Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP15.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.mediacenter:64380
X-Tomcat-NG: microsoft.public.windows.mediacenter
Thanks for keeping us informed!
I assume if it's a server side problem, then one day it'll just Start
Working Right? Cool!
Dana Cline - MCE MVP
""Chris Hill [MSFT]"" <a-chill@microsoft.com> wrote in message
news:IeDy6b93FHA.2984@TK2MSFTNGXA01.phx.gbl...
Hi Folks,
I have good news and (kind of) Bad news about this.
Bad News: The cause of this has a larger impact than just the accented
characters being changed. Testing and Quality assurance has not signed
off
on the solution. We will not be rolling out the solution until a full
test
pass is done and all parties involved have signed off on it.
Good News: We know the cause and have a solution that is not only under
development but has the fix already done and checked in for testing.
What
this means is that the issue is server side, not client so you will not
need to download any patches. It also means that I'm doing something
right
with your feedback as everyone agrees its important.
Thank you for the feedback!
Chris
WMIS
Please do not send e-mail directly to this alias. This address is for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no
rights.
--------------------
Thread-Topic: French accented characters not displaying in program
guide
thread-index: AcXfsYrWzJ+uvoRqRYeKg7nV717cDg==
X-WBNR-Posting-Host: 24.200.233.157
From: =?Utf-8?B?U3TDqXBoYW5l?= <Stéphane@discussions.microsoft.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
ALpNOVC3FHA.1144@TK2MSFTNGXA01.phx.gbl
E3B01011-3EA5-4838-A16A-F6B4A66A4797@microsoft.com
Subject: Re: French accented characters not displaying in program guide
Date: Wed, 2 Nov 2005 05:30:08 -0800
Lines: 84
Message-ID: <7DE6270A-10A9-4DCE-A7E2-14AE7A2AC001@microsoft.com
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 8bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA02.phx.gbl!TK2MSFTNGXA03.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.mediacenter:64308
X-Tomcat-NG: microsoft.public.windows.mediacenter
Hi,
I still have that problem too. Are you going to release a patch or fix
something on your side? Thank you.
Stéphane
"Claude" wrote:
Hi Chris,
I read this thread a couple of days ago without posting, just waiting
for
11/1 for an improvement on that problem that I am also experiencing.
Unfortunately, today 11/2 I still have the same problem. I tried to
reinitialize the guide without improvement. I don't see any patch on
download.microsoft.com.
Claude
""Chris Hill [MSFT]"" wrote:
Hi Charles,
This issue should be showing as corrected on 1/11. If it still
repros for
you after that date please post a response here.
Thank you!
Chris Hill
Windows Media
Please do not send e-mail directly to this alias. This address is
for
newsgroup purposes only.
This posting is provided "AS IS" with no warranties, and confers no
rights.
--------------------
From: "Michel Bordeleau [MCE-MVP]" <Michel.mcemvp@googlemail.com
References: <eiz1esx1FHA.664@tk2msftngp13.phx.gbl
Subject: Re: French accented characters not displaying in program
guide
Date: Thu, 27 Oct 2005 17:29:08 -0400
Lines: 28
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.2670
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2670
X-RFC2646: Format=Flowed; Original
Message-ID: <OHdiC3z2FHA.2268@TK2MSFTNGP15.phx.gbl
Newsgroups: microsoft.public.windows.mediacenter
NNTP-Posting-Host: modemcable209.143-202-24.mc.videotron.ca
24.202.143.209
Path:
TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP15.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl
microsoft.public.windows.mediacenter:63420
X-Tomcat-NG: microsoft.public.windows.mediacenter
Just to let you know that Microsoft has been made aware of this
issue and
they are looking into it.
--
Michel Bordeleau
MS-MVP - Windows XP Media Center Edition
(remove oogle from email address to email me)
"Charles de la Sablonniere"
delasablonnierec_NOSPAM_@ca.objectiflune.com
wrote in message news:eiz1esx1FHA.664@tk2msftngp13.phx.gbl...
Hi,
I have MCE 2005, and the only problem I'm having with it is
that
all
french accented characters are not displaying properly in the
program
guide.
For example, the EAcute(é) is always displaying as a comma,
the
EGrave(è) as a SCaron(S)...
Anybody has an idea of how I can fix this?
TIA
Charles
|
|
|
| Back to top |
|
|
Claude
Guest
|
| Posted:
Tue Nov 08, 2005 1:28 am Post subject:
Re: French accented characters not displaying in program gui |
|
|
Claude
Postal code G1G 2P3
Quebec City Videotron analog
""Chris Hill [MSFT]"" wrote:
| Quote: | Hi Folks,
If this is happening can you please give me your postal code? We want to
have several examples to test with.
Chris Hill
Windows Media
|
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in