install xp in one pc and wont work on another
WinXPTalk.com Forum Index WinXPTalk.com
Forums for Windows XP users.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web winxptalk.com
install xp in one pc and wont work on another

 
Post new topic   Reply to topic    WinXPTalk.com Forum Index -> Accessibility
Author Message
jim
Guest
Posted: Sun Dec 12, 2004 1:03 pm    Post subject: install xp in one pc and wont work on another Reply with quote
My pc has Motherboard Manual "M741LMRT" Slot1/Socket-370, PCCHIPS, XCEL2000,
SIS620/5595 Chipset, P3 550MHZ and because of the system (98se) is not in
perfect working order. I took the hdd (20)gb and reformat, install Xp prof
from my friend's computer which is also a P3, 660mhz. Tested in his pc and is
working fine, including all the updates etc

I connect it to my own pc and it would not boot to XP. It will always give
you the message that because it previously did not ...etc , remove all new
installations etc..... and it also show the start up menu where you can
choose safe mode, safe mode with prompt, last known good config etc..."

So when I choose 'safe mode', it will still come back o the safe mode menu.
when I choose "start normally", it will also come back to the safe mode menu.

Any idea whats wrong with it, is it that we cannot load the XP from 1 pc and
install into a different comparable pc. appreciate your advice, thanks
Back to top
Jupiter Jones [MVP]
Guest
Posted: Sun Dec 12, 2004 1:08 pm    Post subject: Re: install xp in one pc and wont work on another Reply with quote
Jim;
You can not use your friends Windows XP license on your computer.
You need your own copy.

--
Jupiter Jones [MVP]
http://www3.telus.net/dandemar/


"jim" <jim@discussions.microsoft.com> wrote in message
news:081D9107-A3C9-4B3E-8396-E9785073CCB5@microsoft.com...
Quote:

My pc has Motherboard Manual "M741LMRT" Slot1/Socket-370, PCCHIPS,
XCEL2000,
SIS620/5595 Chipset, P3 550MHZ and because of the system (98se) is not in
perfect working order. I took the hdd (20)gb and reformat, install Xp prof
from my friend's computer which is also a P3, 660mhz. Tested in his pc and
is
working fine, including all the updates etc

I connect it to my own pc and it would not boot to XP. It will always give
you the message that because it previously did not ...etc , remove all new
installations etc..... and it also show the start up menu where you can
choose safe mode, safe mode with prompt, last known good config etc..."

So when I choose 'safe mode', it will still come back o the safe mode
menu.
when I choose "start normally", it will also come back to the safe mode
menu.

Any idea whats wrong with it, is it that we cannot load the XP from 1 pc
and
install into a different comparable pc. appreciate your advice, thanks
Back to top
jim
Guest
Posted: Mon Dec 13, 2004 1:21 pm    Post subject: Re: install xp in one pc and wont work on another Reply with quote
have my own disk. basically asked my friend to show me how to install prior
to us going downtown to get the ram required in my pc to run xp. so it didnt
work. any ideas why.. thanks

"Jupiter Jones [MVP]" wrote:

Quote:
Jim;
You can not use your friends Windows XP license on your computer.
You need your own copy.

--
Jupiter Jones [MVP]
http://www3.telus.net/dandemar/


"jim" <jim@discussions.microsoft.com> wrote in message
news:081D9107-A3C9-4B3E-8396-E9785073CCB5@microsoft.com...

My pc has Motherboard Manual "M741LMRT" Slot1/Socket-370, PCCHIPS,
XCEL2000,
SIS620/5595 Chipset, P3 550MHZ and because of the system (98se) is not in
perfect working order. I took the hdd (20)gb and reformat, install Xp prof
from my friend's computer which is also a P3, 660mhz. Tested in his pc and
is
working fine, including all the updates etc

I connect it to my own pc and it would not boot to XP. It will always give
you the message that because it previously did not ...etc , remove all new
installations etc..... and it also show the start up menu where you can
choose safe mode, safe mode with prompt, last known good config etc..."

So when I choose 'safe mode', it will still come back o the safe mode
menu.
when I choose "start normally", it will also come back to the safe mode
menu.

Any idea whats wrong with it, is it that we cannot load the XP from 1 pc
and
install into a different comparable pc. appreciate your advice, thanks


Back to top
Jupiter Jones [MVP]
Guest
Posted: Mon Dec 13, 2004 1:29 pm    Post subject: Re: install xp in one pc and wont work on another Reply with quote
Jim;
Try a Repair Installation:
http://www3.telus.net/dandemar/repaxp.htm
Be sure to use your Product Key and CD.

--
Jupiter Jones [MVP]
http://www3.telus.net/dandemar/


"jim" <jim@discussions.microsoft.com> wrote in message
news:B4348DBB-A91E-4587-88B5-6F35DEC9108A@microsoft.com...
Quote:
have my own disk. basically asked my friend to show me how to install
prior
to us going downtown to get the ram required in my pc to run xp. so it
didnt
work. any ideas why.. thanks

"Jupiter Jones [MVP]" wrote:

Jim;
You can not use your friends Windows XP license on your computer.
You need your own copy.

--
Jupiter Jones [MVP]
http://www3.telus.net/dandemar/


"jim" <jim@discussions.microsoft.com> wrote in message
news:081D9107-A3C9-4B3E-8396-E9785073CCB5@microsoft.com...

My pc has Motherboard Manual "M741LMRT" Slot1/Socket-370, PCCHIPS,
XCEL2000,
SIS620/5595 Chipset, P3 550MHZ and because of the system (98se) is not
in
perfect working order. I took the hdd (20)gb and reformat, install Xp
prof
from my friend's computer which is also a P3, 660mhz. Tested in his pc
and
is
working fine, including all the updates etc

I connect it to my own pc and it would not boot to XP. It will always
give
you the message that because it previously did not ...etc , remove all
new
installations etc..... and it also show the start up menu where you can
choose safe mode, safe mode with prompt, last known good config etc..."

So when I choose 'safe mode', it will still come back o the safe mode
menu.
when I choose "start normally", it will also come back to the safe mode
menu.

Any idea whats wrong with it, is it that we cannot load the XP from 1
pc
and
install into a different comparable pc. appreciate your advice, thanks


Back to top
jim
Guest
Posted: Mon Dec 13, 2004 7:35 pm    Post subject: Re: install xp in one pc and wont work on another Reply with quote
Now, can't even get the pc to the "safe mode' menu. when I on the pc, nothing
happen. I tried to press 'delete' to go to cmos, also unable, just THE SAME
black screen. noticed that after I on the pc, the monitor light wll just go
from green to orange (no signals, all connections are ok including the
monitor). I tried to start with the system disk (98se), also nothing happen.
Has it got to do with the bios?. Your assistance much appreciated, thanks.

"Jupiter Jones [MVP]" wrote:

Quote:
Jim;
Try a Repair Installation:
http://www3.telus.net/dandemar/repaxp.htm
Be sure to use your Product Key and CD.

--
Jupiter Jones [MVP]
http://www3.telus.net/dandemar/


"jim" <jim@discussions.microsoft.com> wrote in message
news:B4348DBB-A91E-4587-88B5-6F35DEC9108A@microsoft.com...
have my own disk. basically asked my friend to show me how to install
prior
to us going downtown to get the ram required in my pc to run xp. so it
didnt
work. any ideas why.. thanks

"Jupiter Jones [MVP]" wrote:

Jim;
You can not use your friends Windows XP license on your computer.
You need your own copy.

--
Jupiter Jones [MVP]
http://www3.telus.net/dandemar/


"jim" <jim@discussions.microsoft.com> wrote in message
news:081D9107-A3C9-4B3E-8396-E9785073CCB5@microsoft.com...

My pc has Motherboard Manual "M741LMRT" Slot1/Socket-370, PCCHIPS,
XCEL2000,
SIS620/5595 Chipset, P3 550MHZ and because of the system (98se) is not
in
perfect working order. I took the hdd (20)gb and reformat, install Xp
prof
from my friend's computer which is also a P3, 660mhz. Tested in his pc
and
is
working fine, including all the updates etc

I connect it to my own pc and it would not boot to XP. It will always
give
you the message that because it previously did not ...etc , remove all
new
installations etc..... and it also show the start up menu where you can
choose safe mode, safe mode with prompt, last known good config etc..."

So when I choose 'safe mode', it will still come back o the safe mode
menu.
when I choose "start normally", it will also come back to the safe mode
menu.

Any idea whats wrong with it, is it that we cannot load the XP from 1
pc
and
install into a different comparable pc. appreciate your advice, thanks





Back to top
Jupiter Jones [MVP]
Guest
Posted: Tue Dec 14, 2004 11:55 am    Post subject: Re: install xp in one pc and wont work on another Reply with quote
Jim;
If you can not get to the BIOS,you may have a hardware problem.
Power off.
Start by disconnecting all peripherals such as printer, camera, scanner etc.
Open case and reseat all cards and cables.
Try another monitor after checking all monitor connections carefully.

--
Jupiter Jones [MVP]
http://www3.telus.net/dandemar/


"jim" <jim@discussions.microsoft.com> wrote in message
news:AB7A3C79-64FB-4911-AEC2-AB42784C2712@microsoft.com...
Quote:
Now, can't even get the pc to the "safe mode' menu. when I on the pc,
nothing
happen. I tried to press 'delete' to go to cmos, also unable, just THE
SAME
black screen. noticed that after I on the pc, the monitor light wll just
go
from green to orange (no signals, all connections are ok including the
monitor). I tried to start with the system disk (98se), also nothing
happen.
Has it got to do with the bios?. Your assistance much appreciated, thanks.

"Jupiter Jones [MVP]" wrote:

Jim;
Try a Repair Installation:
http://www3.telus.net/dandemar/repaxp.htm
Be sure to use your Product Key and CD.

--
Jupiter Jones [MVP]
http://www3.telus.net/dandemar/


"jim" <jim@discussions.microsoft.com> wrote in message
news:B4348DBB-A91E-4587-88B5-6F35DEC9108A@microsoft.com...
have my own disk. basically asked my friend to show me how to install
prior
to us going downtown to get the ram required in my pc to run xp. so it
didnt
work. any ideas why.. thanks

"Jupiter Jones [MVP]" wrote:

Jim;
You can not use your friends Windows XP license on your computer.
You need your own copy.

--
Jupiter Jones [MVP]
http://www3.telus.net/dandemar/


"jim" <jim@discussions.microsoft.com> wrote in message
news:081D9107-A3C9-4B3E-8396-E9785073CCB5@microsoft.com...

My pc has Motherboard Manual "M741LMRT" Slot1/Socket-370, PCCHIPS,
XCEL2000,
SIS620/5595 Chipset, P3 550MHZ and because of the system (98se) is
not
in
perfect working order. I took the hdd (20)gb and reformat, install
Xp
prof
from my friend's computer which is also a P3, 660mhz. Tested in his
pc
and
is
working fine, including all the updates etc

I connect it to my own pc and it would not boot to XP. It will
always
give
you the message that because it previously did not ...etc , remove
all
new
installations etc..... and it also show the start up menu where you
can
choose safe mode, safe mode with prompt, last known good config
etc..."

So when I choose 'safe mode', it will still come back o the safe
mode
menu.
when I choose "start normally", it will also come back to the safe
mode
menu.

Any idea whats wrong with it, is it that we cannot load the XP from
1
pc
and
install into a different comparable pc. appreciate your advice,
thanks





Back to top
Guest
Posted: Tue Dec 14, 2004 3:31 pm    Post subject: Re: install xp in one pc and wont work on another Reply with quote
"jim" <jim@discussions.microsoft.com> wrote in message
news:081D9107-A3C9-4B3E-8396-E9785073CCB5@microsoft.com...
Quote:

My pc has Motherboard Manual "M741LMRT" Slot1/Socket-370, PCCHIPS,
XCEL2000,
SIS620/5595 Chipset, P3 550MHZ and because of the system (98se) is not in
perfect working order. I took the hdd (20)gb and reformat, install Xp prof
from my friend's computer which is also a P3, 660mhz. Tested in his pc and
is
working fine, including all the updates etc

I connect it to my own pc and it would not boot to XP. It will always give
you the message that because it previously did not ...etc , remove all new
installations etc..... and it also show the start up menu where you can
choose safe mode, safe mode with prompt, last known good config etc..."

So when I choose 'safe mode', it will still come back o the safe mode
menu.
when I choose "start normally", it will also come back to the safe mode
menu.

Any idea whats wrong with it, is it that we cannot load the XP from 1 pc
and
install into a different comparable pc. appreciate your advice, thanks

I had the same/similar problem. I installed a 'new' hard drive from an old
computer which was bigger than the one I was replacing. FDISK'd it and
installed XP pro. It would not boot. Kept giving me a blue screen of death.
Put the old drive in and it worked straight off.

Put the 'new' drive back into another computer and it was fine. Using it as
a back-up drive now. Still none the wiser why it wouldn't work though.
Back to top
 
Post new topic   Reply to topic    WinXPTalk.com Forum Index -> Accessibility All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Office Forums Access Forums Windows Server Exchange Server Help
New Topics Powered by phpBB