WinXPTalk.com

Patrick · Guest

Here is a copy of the problem I'm having quoted from another forum:

"Weirder FTP problems...

--------------------------------------------------------------------------------

Hi, I'm using the latest version of Bulletproof FTP Server to host a small
FTP site for clients to upload things to us, but I cannot seem to get it to
work. I have installed BPFTP Server on a computer on my network with the
address 192.168.1.210...it is connected to a switch, which is connected to
our router at address 192.168.1.1 which has the appropriate ports forwarded
to the computer hosting the FTP...the router is then connected to our cable
modem which has a static IP address. Whenever someone tries to connect(or
even if I try to connect locally) the server gives me the following messages:

(000042) 12/20/2004 3:33:21 PM - (not logged in) (24.55.151.214) > connected
to ip : 0.0.0.0
(000042) 12/20/2004 3:33:21 PM - (not logged in) (24.55.151.214) > sending
welcome message.
(000042) 12/20/2004 3:33:21 PM - (not logged in) (24.55.151.214) > 220 Evil
Twin FTP
(000042) 12/20/2004 3:33:21 PM - (not logged in) (24.55.151.214) >
disconnected.

On the client side it's just saying that the connection is timing out.
Anyone have a clue?

Thanks,
Patrick"

This reply I made is the important one for you folks here:

"Okay, well I figured out what was causing the problem. I have two ethernet
adapters installed, both have internet access, but one cannot have the
necessary ports forwarded to it due to the way the network is constructed. I
disabled that network, and all of my ftp problems have gone away, but now I
can't connect to my other network...which is just as important. Is there any
way to disable internet access from going through that adapter, while leaving
the rest of my network connectivity intact?"

Do you guys here have any ideas as far as how I should configure this
computer to gain internet access only through the adapter I choose?

	WinXPTalk.com Forum Index -> Network	All times are GMT
Page 1 of 1