Printer
WinXPTalk.com Forum Index WinXPTalk.com
Forums for Windows XP users.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web winxptalk.com
Printer

 
Post new topic   Reply to topic    WinXPTalk.com Forum Index -> Network
Author Message
Stumpy
Guest





Posted: Mon Dec 20, 2004 8:45 am    Post subject: Printer Reply with quote

Am trying to connect two systems on a home network, both
MS XP Home. Specifically, I'm trying to connect to a
printer wired via USB to an Ethernet-wired computer, from
a wireless notebook (G) through a Netgear router on a DSL
line. None of the devices see each other. Windows
Firewall is OFF, both systems are SP2, user accounts are
setup on both systems for the other system, have run the
Network Setup Wizard, printer is shared . . . What am I
missing ?
..
Back to top
Nepatsfan
Guest





Posted: Mon Dec 20, 2004 9:35 am    Post subject: Re: Printer Reply with quote

On the laptop, did you run the Wireless Network Setup Wizard in
Control Panel?
This is quite different that the Network Connection Wizard.
Are you using the same SSID name on the laptop that exists on the
router?
Have you enabled Wireless access on your router?
Have you changed any of the settings on the router?

On the laptop go to Start -> Run -> cmd.exe. Enter ipconfig /all.
What's listed for IP address, subnet mask and default gateway?
They should be:
IP: 192.168.0.XXX (where XXX is a number between 2 and 254)
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.1

You can access the router's settings by going to Start -> Run.
Then enter http://192.168.0.1 which will allow you to make the
neccessary changes.

Check the CD that came with your router for a manual in .pdf
format. It may give some insight into the problem you're having.

Nepatsfan
"Stumpy" <anonymous@discussions.microsoft.com> wrote in message
news:186a01c4e646$52cf40f0$a601280a@phx.gbl...
Quote:
Am trying to connect two systems on a home network, both
MS XP Home. Specifically, I'm trying to connect to a
printer wired via USB to an Ethernet-wired computer, from
a wireless notebook (G) through a Netgear router on a DSL
line. None of the devices see each other. Windows
Firewall is OFF, both systems are SP2, user accounts are
setup on both systems for the other system, have run the
Network Setup Wizard, printer is shared . . . What am I
missing ?
.

Back to top
 
Post new topic   Reply to topic    WinXPTalk.com Forum Index -> Network All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Office Forums Access Forums Windows Server Exchange Server Help
New Topics Powered by phpBB