| Author |
Message |
cyndi
Guest
|
 Posted:
Tue Jan 04, 2005 10:49 pm Post subject:
epson lq570+ |
|
|
printer is very slow. takes 2 minutes to do 2 page report. Saw advice to
change parrell port bios to at or something else but not ecp or epp. Mine
are on lpt1. any new ideas?
--
cyndi |
|
| Back to top |
|
 |
Cari (MS-MVP)
Guest
|
| Posted:
Wed Jan 05, 2005 12:56 am Post subject:
Re: epson lq570+ |
|
|
Besides ECP and/or EPP, the other option should be just plain
Bi-Directional.
--
Cari (MS-MVP) Windows Client - Printing/Imaging and Hardware
www.coribright.com
"cyndi" <cyndi@discussions.microsoft.com> wrote in message
news:B4A47DF6-6D0B-4480-881A-F21DF6153C4C@microsoft.com...
| Quote: | printer is very slow. takes 2 minutes to do 2 page report. Saw advice to
change parrell port bios to at or something else but not ecp or epp. Mine
are on lpt1. any new ideas?
--
cyndi
|
|
|
| Back to top |
|
|
cyndi
Guest
|
| Posted:
Wed Jan 05, 2005 2:19 am Post subject:
Re: epson lq570+ |
|
|
Thank you. when i went to port options i only had lpt1 or com1
cyndi
"Cari (MS-MVP)" wrote:
| Quote: | Besides ECP and/or EPP, the other option should be just plain
Bi-Directional.
--
Cari (MS-MVP) Windows Client - Printing/Imaging and Hardware
www.coribright.com
"cyndi" <cyndi@discussions.microsoft.com> wrote in message
news:B4A47DF6-6D0B-4480-881A-F21DF6153C4C@microsoft.com...
printer is very slow. takes 2 minutes to do 2 page report. Saw advice to
change parrell port bios to at or something else but not ecp or epp. Mine
are on lpt1. any new ideas?
--
cyndi
|
|
|
| Back to top |
|
|
Chuck
Guest
|
| Posted:
Wed Jan 05, 2005 8:02 am Post subject:
Re: epson lq570+ |
|
|
The ECP/EPP/SPP or Bi-directional refers to the BIOS settings. Windows
generally reads this, then sets itself to the appropriate mode. A dot
matrix printer can be painfully slow, unless it's built in fonts (if it has
any) are used.
Most dot matrix printers (Usually older models) are happy with SPP or
hopefully ECP.
Bi directional can be a variation on SPP, or in addition to it.
This whole thing gets deeper than I want to go, except to say that things
have actually gotten simpler.
"cyndi" <cyndi@discussions.microsoft.com> wrote in message
news:7C1B17BF-53F9-4157-B3E9-6B6D7D7E610B@microsoft.com...
| Quote: | Thank you. when i went to port options i only had lpt1 or com1
cyndi
"Cari (MS-MVP)" wrote:
Besides ECP and/or EPP, the other option should be just plain
Bi-Directional.
--
Cari (MS-MVP) Windows Client - Printing/Imaging and Hardware
www.coribright.com
"cyndi" <cyndi@discussions.microsoft.com> wrote in message
news:B4A47DF6-6D0B-4480-881A-F21DF6153C4C@microsoft.com...
printer is very slow. takes 2 minutes to do 2 page report. Saw advice
to
change parrell port bios to at or something else but not ecp or epp.
Mine
are on lpt1. any new ideas?
--
cyndi
|
|
|
| Back to top |
|
|
Box134
Guest
|
| Posted:
Sat Jan 08, 2005 9:33 am Post subject:
Re: epson lq570+ |
|
|
IMHO port settings mean nothing with this printer, I've tried them all.
First and foremost, make sure you aren't printing at 360 X 360 DPI. At that
setting print quality is very good and print speed very low. Change the
setting to 360 X 180 or, if you can stand it, 180 X 180. I think each step
down in quality increases printing speed exponentially.
Now, if your report could print in pure text mode, when the printer's
internal fonts are used, you'd beat any printer for text!
"cyndi" <cyndi@discussions.microsoft.com> wrote in message
news:B4A47DF6-6D0B-4480-881A-F21DF6153C4C@microsoft.com...
| Quote: | printer is very slow. takes 2 minutes to do 2 page report. Saw advice to
change parrell port bios to at or something else but not ecp or epp. Mine
are on lpt1. any new ideas? |
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in