WinXPTalk.com

nedsully7949 · Guest

I've tried to boot from the XP disk and I get an error msg(with Blue
screen)IRQL_NOT_LESS_OR _EQUAL
Stop:0x0000000a(0x02070027,etc Can anyone help??!!

mtjoyhero · Guest

Try
<http://www.microsoft.com/resources/documentation/Windows/XP/all/reskit/en-us/Default.asp?url=/resources/documentation/Windows/XP/all/reskit/en-us/prmd_stp_hwpg.asp>
and/or http://support.microsoft.com/default.aspx?scid=kb;en-us;314063

They point to hardware/driver issues.

Jeff S

"nedsully7949" wrote:

nedsully7949 · Guest

This helps to the extent that I now know what the stop referes to, But since
I can't boot the computer I can't remove the software that I believe caused
the fault.(roxio CD )

"mtjoyhero" wrote:

mtjoyhero · Guest

Have you tried to boot into safe mode or Last known good config? Hit f8 at
startup to bring up a menu for these choices.

Jeff S

"nedsully7949" wrote:

nedsully7949 · Guest

I've tried all possibilities...no go.I have tried to download 6 floppy disks
of system restore with no luck. I've made a bootdisk from my other PC running
XP... no go.I feel that if I had either a floppy or a cd with commands that
would uninstall easy cd creator or make the neccesary changes to the
registry(or allow me access to regedit so I could make nec changes I would
then be OK. Any Ideas???

"mtjoyhero" wrote:

Michael Solomon (MS-MVP) · Guest

The six floppies only provide a way for a user whose system cannot boot from
a CD-ROM drive to begin setup by booting from the floppy drive. Ultimately,
you would still need to access the CD-ROM drive. There is a means of
starting the recovery console with the floppy disks but that function when
begun from the floppies is quite limited.

You might try using System Restore, it can be invoked from a command prompt.
In other words, you would boot the system, start tapping F8, when the menu
appears, you would select Command Prompt and press enter, then follow the
directions in the Knowledge Base Article for beginning System Restore and
see if it can take you back to a time before this began:
http://support.microsoft.com/?kbid=304449

Are you quite sure the issue is Easy CD Creator, what version did you
install? Problems with this software should not prevent booting from the
CD-ROM drive as this is outside the XP environment. This issue and error
you describe can be any number of hardware related issues. Also, booting
from a DOS boot floppy is useless if your system is using NTFS as opposed to
the FAT 32 file system as once booted from that disk you cannot read an NTFS
partition.

Given the things you have tried and failed, you are getting close to either
needing the help of a shop or formatting and starting over and because the
error is indicative of some hardware issue, formatting which in this case
would require deleting the partition, creating a new one and formatting the
drive may not resolve the issue.

--
Michael Solomon MS-MVP
Windows Shell/User
Backup is a PC User's Best Friend
DTS-L.Org: http://www.dts-l.org/

"nedsully7949" <nedsully7949@discussions.microsoft.com> wrote in message
news:7C483FCC-DA12-4CF6-90BB-F5E3A21B66D3@microsoft.com...

	WinXPTalk.com Forum Index -> Accessibility	All times are GMT
Page 1 of 1