Time isn't working
WinXPTalk.com Forum Index WinXPTalk.com
Forums for Windows XP users.
 
 FAQFAQ   MemberlistMemberlist     RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
Google
 
Web winxptalk.com
Time isn't working

 
Post new topic   Reply to topic    WinXPTalk.com Forum Index -> Hardware
Author Message
lucky sevans
Guest





Posted: Mon Jan 03, 2005 9:58 am    Post subject: Time isn't working Reply with quote

I don't know where the problem lies, but my computer's time keeps changing.
When I turn on the computer, the time is wrong. I just changed it to the
right time, 1:50am. Last I looked it was correct and said 1:32am. It is
currently 1:40am, and it now says 1:07am. Any suggestions? Oh, and when I
first start up my computer, each time, it won't but i hear the CPU, and i
have to restart a second time.
Back to top
lucky sevans
Guest





Posted: Mon Jan 03, 2005 9:58 am    Post subject: Re: Time isn't working Reply with quote

Quote:
5. Check the computer time. If it is correct then your battery is fine.
If it is wrong then you need to replace the battery. It is usually
a button cell installed on the motherboard.

So, if I have a laptop, I probably won't be able to do it myself? Does it
matter if I just let the time be wrong until, say, May?
Back to top
Pegasus (MVP)
Guest





Posted: Mon Jan 03, 2005 9:58 am    Post subject: Re: Time isn't working Reply with quote

"lucky sevans" <luckysevans@discussions.microsoft.com> wrote in message
news:2C81CCCB-E38D-4603-B93C-04CA462BF1FD@microsoft.com...
Quote:
I don't know where the problem lies, but my computer's time keeps
changing.
When I turn on the computer, the time is wrong. I just changed it to the
right time, 1:50am. Last I looked it was correct and said 1:32am. It is
currently 1:40am, and it now says 1:07am. Any suggestions? Oh, and when
I
first start up my computer, each time, it won't but i hear the CPU, and i
have to restart a second time.

You might have a flat battery. Here is how to confirm it:
1. Reboot your machine.
2. Get into the BIOS setup. On many machines you need to
press the Delete key early in the boot sequence in order
to get there.
3. Set the correct time.
4. Wait 30 minutes.
5. Check the computer time. If it is correct then your battery is fine.
If it is wrong then you need to replace the battery. It is usually
a button cell installed on the motherboard.
Back to top
Pegasus (MVP)
Guest





Posted: Mon Jan 03, 2005 9:58 am    Post subject: Re: Time isn't working Reply with quote

"lucky sevans" <luckysevans@discussions.microsoft.com> wrote in message
news:F3DC59A4-17A7-466A-AF75-165889501480@microsoft.com...
Quote:

5. Check the computer time. If it is correct then your battery is fine.
If it is wrong then you need to replace the battery. It is usually
a button cell installed on the motherboard.

So, if I have a laptop, I probably won't be able to do it myself? Does it
matter if I just let the time be wrong until, say, May?

How about running the test I suggested before
speculating about any subsequent action? The
test result might point to something other than
a dead battery!
Back to top
Pegasus (MVP)
Guest





Posted: Mon Jan 03, 2005 9:58 am    Post subject: Re: Time isn't working Reply with quote

"Peter R. Fletcher" <pfletch(at)fletchers(hyphen)uk.com> wrote in message
news:ij0it09rk9kb6tsevltcitqp5gel4m4k67@4ax.com...
Quote:
On Mon, 3 Jan 2005 17:52:59 +1100, "Pegasus \(MVP\)" <I.can@fly.com
wrote:


"lucky sevans" <luckysevans@discussions.microsoft.com> wrote in message
news:2C81CCCB-E38D-4603-B93C-04CA462BF1FD@microsoft.com...
I don't know where the problem lies, but my computer's time keeps
changing.
When I turn on the computer, the time is wrong. I just changed it to
the
right time, 1:50am. Last I looked it was correct and said 1:32am. It
is
currently 1:40am, and it now says 1:07am. Any suggestions? Oh, and
when
I
first start up my computer, each time, it won't but i hear the CPU, and
i
have to restart a second time.

You might have a flat battery. Here is how to confirm it:
1. Reboot your machine.
2. Get into the BIOS setup. On many machines you need to
press the Delete key early in the boot sequence in order
to get there.
3. Set the correct time.
4. Wait 30 minutes.
5. Check the computer time. If it is correct then your battery is fine.
If it is wrong then you need to replace the battery. It is usually
a button cell installed on the motherboard.


Didn't you miss a step or two?

3.5 (!) Turn off computer and disconnect power lead
....
4.5 Reconnect power, turn on, and boot back into BIOS setup.

If you do exactly as you suggested, the system's RTC remains powered
from the mains throughout, and should keep the correct time, even if
the battery is dead.

Please respond to the Newsgroup, so that others may benefit from the
exchange.
Peter R. Fletcher

I'm trying to vary only one parameter at a time. The OP reports
that the time changes while the machine is powered up. My
test maintains the powered-up condition but it knocks out any
influence from the OS. Your test, while perfectly valid, would
vary two parameters: It removes Windows from the equation,
and it also powers down the laptop.
Back to top
Peter R. Fletcher
Guest





Posted: Mon Jan 03, 2005 9:58 am    Post subject: Re: Time isn't working Reply with quote

On Mon, 3 Jan 2005 17:52:59 +1100, "Pegasus \(MVP\)" <I.can@fly.com>
wrote:

Quote:

"lucky sevans" <luckysevans@discussions.microsoft.com> wrote in message
news:2C81CCCB-E38D-4603-B93C-04CA462BF1FD@microsoft.com...
I don't know where the problem lies, but my computer's time keeps
changing.
When I turn on the computer, the time is wrong. I just changed it to the
right time, 1:50am. Last I looked it was correct and said 1:32am. It is
currently 1:40am, and it now says 1:07am. Any suggestions? Oh, and when
I
first start up my computer, each time, it won't but i hear the CPU, and i
have to restart a second time.

You might have a flat battery. Here is how to confirm it:
1. Reboot your machine.
2. Get into the BIOS setup. On many machines you need to
press the Delete key early in the boot sequence in order
to get there.
3. Set the correct time.
4. Wait 30 minutes.
5. Check the computer time. If it is correct then your battery is fine.
If it is wrong then you need to replace the battery. It is usually
a button cell installed on the motherboard.


Didn't you miss a step or two?

3.5 (!) Turn off computer and disconnect power lead
.....
4.5 Reconnect power, turn on, and boot back into BIOS setup.

If you do exactly as you suggested, the system's RTC remains powered
from the mains throughout, and should keep the correct time, even if
the battery is dead.

Please respond to the Newsgroup, so that others may benefit from the exchange.
Peter R. Fletcher
Back to top
Michael Cecil
Guest





Posted: Mon Jan 03, 2005 3:16 pm    Post subject: Re: Time isn't working Reply with quote

On Sun, 2 Jan 2005 23:47:03 -0800, lucky sevans
<luckysevans@discussions.microsoft.com> wrote:

Quote:

5. Check the computer time. If it is correct then your battery is fine.
If it is wrong then you need to replace the battery. It is usually
a button cell installed on the motherboard.

So, if I have a laptop, I probably won't be able to do it myself? Does it
matter if I just let the time be wrong until, say, May?

It's often very easy to replace the CMOS battery in a laptop. You should
be able to research how on the laptop company's website. Just having the
time go wrong isn't so bad, but when the battery goes completely flat and
you lose other settings for the CPU and drives, then you'll have problems.

--
Michael Cecil
http://home.comcast.net/~macecil/
Back to top
Bob I
Guest





Posted: Tue Jan 04, 2005 7:28 pm    Post subject: Re: Time isn't working Reply with quote

Actually, given the "need to restart" or "double start" the unit to get
it to boot tend to point to a flat CMOS battery.

Pegasus (MVP) wrote:

Quote:
"lucky sevans" <luckysevans@discussions.microsoft.com> wrote in message
news:F3DC59A4-17A7-466A-AF75-165889501480@microsoft.com...

5. Check the computer time. If it is correct then your battery is fine.
If it is wrong then you need to replace the battery. It is usually
a button cell installed on the motherboard.

So, if I have a laptop, I probably won't be able to do it myself? Does it
matter if I just let the time be wrong until, say, May?


How about running the test I suggested before
speculating about any subsequent action? The
test result might point to something other than
a dead battery!


Back to top
 
Post new topic   Reply to topic    WinXPTalk.com Forum Index -> Hardware All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Office Forums Access Forums Windows Server Exchange Server Help
New Topics Powered by phpBB