| Author |
Message |
Michael M.
Guest
|
 Posted:
Wed Oct 26, 2005 7:05 am Post subject:
WinPE boot from Hard Disk partition |
|
|
What is the process to boot WinPE from a Hard Disk partition other than C
partition.
(i.e. an active partition E) without using Command Console (cmdcons)? |
|
| Back to top |
|
 |
John Coyne (eMVP)
Guest
|
| Posted:
Wed Oct 26, 2005 8:28 am Post subject:
Re: WinPE boot from Hard Disk partition |
|
|
Michael,
This post is a little vague... are you attempting to boot the machine from a
cold state into the Win PE Partition?
First, this may not be the best NG to post winPE questions into, as the
Windows XPE team does not own WinPE, they only use it for purposes of TA and
TAP.exe to deploy XPE... might try something along the lines of
microsoft.public.windowsxp.setup_deployment... not sure if that's the right
one either, but might be worth a shot...
That being said, I have not personally tried to get WinPE to boot from a
HDD. I have yet to run into a scenario where the CDROM won't work, or that I
would need to boot from HDD... The OPK may allow you to setup some fun stuff
to make it work, but no guarantees. :-)
HTH, JC
--
John Coyne
eMVP
Windows Embedded Black Belt
Arrow Electronics, OCS division
When replying directly to this message remove the NOSPAM_ from the address
"Michael M." <MichaelM@discussions.microsoft.com> wrote in message
news:78792AE2-DD3D-49EC-9F9A-D9F3D638603A@microsoft.com...
| Quote: | What is the process to boot WinPE from a Hard Disk partition other than C
partition.
(i.e. an active partition E) without using Command Console (cmdcons)? |
|
|
| Back to top |
|
|
John Coyne (eMVP)
Guest
|
| Posted:
Wed Oct 26, 2005 4:27 pm Post subject:
Re: WinPE boot from Hard Disk partition |
|
|
Hi Michael,
If you contact me OL, I may be able to help further... I am actually in your
general Area (Seattle)
Thanks,
JC
--
John Coyne
eMVP
Windows Embedded Black Belt
Arrow Electronics, OCS division
When replying directly to this message remove the NOSPAM_ from the address
"Michael M." <MichaelM@discussions.microsoft.com> wrote in message
news:D4B002E2-40D7-43AA-BE67-488D56835374@microsoft.com...
| Quote: | John,
Just a bit of clarification. I work for Itronix Corporation in Spokane. We
have licensing with Microsoft and my supervisor or one the senior
developers
here may already have the WinPE OEM Preinstallation Kit, I need to ask
around. My motivation for booting from E partition is as follows.
We have a recovery image saved on our laptops on the E partition. We are
attempting to start WinPE and load the recovery image from this partition
exclusively without needing any access to a CD or any files on C. The
reason
being if a customer needs to recover, their machine may not have reliable
files on C or drivers to run the CD drive. I hope this helps clarify my
question. I will try posting to the other forum as well. Thanks alot.
Michael
"John Coyne (eMVP)" wrote:
Michael,
This post is a little vague... are you attempting to boot the machine
from a
cold state into the Win PE Partition?
First, this may not be the best NG to post winPE questions into, as the
Windows XPE team does not own WinPE, they only use it for purposes of TA
and
TAP.exe to deploy XPE... might try something along the lines of
microsoft.public.windowsxp.setup_deployment... not sure if that's the
right
one either, but might be worth a shot...
That being said, I have not personally tried to get WinPE to boot from a
HDD. I have yet to run into a scenario where the CDROM won't work, or
that I
would need to boot from HDD... The OPK may allow you to setup some fun
stuff
to make it work, but no guarantees. :-)
HTH, JC
--
John Coyne
eMVP
Windows Embedded Black Belt
Arrow Electronics, OCS division
When replying directly to this message remove the NOSPAM_ from the
address
"Michael M." <MichaelM@discussions.microsoft.com> wrote in message
news:78792AE2-DD3D-49EC-9F9A-D9F3D638603A@microsoft.com...
What is the process to boot WinPE from a Hard Disk partition other than
C
partition.
(i.e. an active partition E) without using Command Console (cmdcons)?
|
|
|
| Back to top |
|
|
Michael M.
Guest
|
| Posted:
Wed Oct 26, 2005 4:27 pm Post subject:
Re: WinPE boot from Hard Disk partition |
|
|
John,
Just a bit of clarification. I work for Itronix Corporation in Spokane. We
have licensing with Microsoft and my supervisor or one the senior developers
here may already have the WinPE OEM Preinstallation Kit, I need to ask
around. My motivation for booting from E partition is as follows.
We have a recovery image saved on our laptops on the E partition. We are
attempting to start WinPE and load the recovery image from this partition
exclusively without needing any access to a CD or any files on C. The reason
being if a customer needs to recover, their machine may not have reliable
files on C or drivers to run the CD drive. I hope this helps clarify my
question. I will try posting to the other forum as well. Thanks alot.
Michael
"John Coyne (eMVP)" wrote:
| Quote: | Michael,
This post is a little vague... are you attempting to boot the machine from a
cold state into the Win PE Partition?
First, this may not be the best NG to post winPE questions into, as the
Windows XPE team does not own WinPE, they only use it for purposes of TA and
TAP.exe to deploy XPE... might try something along the lines of
microsoft.public.windowsxp.setup_deployment... not sure if that's the right
one either, but might be worth a shot...
That being said, I have not personally tried to get WinPE to boot from a
HDD. I have yet to run into a scenario where the CDROM won't work, or that I
would need to boot from HDD... The OPK may allow you to setup some fun stuff
to make it work, but no guarantees. :-)
HTH, JC
--
John Coyne
eMVP
Windows Embedded Black Belt
Arrow Electronics, OCS division
When replying directly to this message remove the NOSPAM_ from the address
"Michael M." <MichaelM@discussions.microsoft.com> wrote in message
news:78792AE2-DD3D-49EC-9F9A-D9F3D638603A@microsoft.com...
What is the process to boot WinPE from a Hard Disk partition other than C
partition.
(i.e. an active partition E) without using Command Console (cmdcons)?
|
|
|
| Back to top |
|
|
Michael M.
Guest
|
| Posted:
Thu Oct 27, 2005 12:28 am Post subject:
Re: WinPE boot from Hard Disk partition |
|
|
Hi John,
As it turns out I got the help in-house. I appreciate your offer.
Thanks.
Michael
"John Coyne (eMVP)" wrote:
| Quote: | Hi Michael,
If you contact me OL, I may be able to help further... I am actually in your
general Area (Seattle)
Thanks,
JC
--
John Coyne
eMVP
Windows Embedded Black Belt
Arrow Electronics, OCS division
When replying directly to this message remove the NOSPAM_ from the address
"Michael M." <MichaelM@discussions.microsoft.com> wrote in message
news:D4B002E2-40D7-43AA-BE67-488D56835374@microsoft.com...
John,
Just a bit of clarification. I work for Itronix Corporation in Spokane. We
have licensing with Microsoft and my supervisor or one the senior
developers
here may already have the WinPE OEM Preinstallation Kit, I need to ask
around. My motivation for booting from E partition is as follows.
We have a recovery image saved on our laptops on the E partition. We are
attempting to start WinPE and load the recovery image from this partition
exclusively without needing any access to a CD or any files on C. The
reason
being if a customer needs to recover, their machine may not have reliable
files on C or drivers to run the CD drive. I hope this helps clarify my
question. I will try posting to the other forum as well. Thanks alot.
Michael
"John Coyne (eMVP)" wrote:
Michael,
This post is a little vague... are you attempting to boot the machine
from a
cold state into the Win PE Partition?
First, this may not be the best NG to post winPE questions into, as the
Windows XPE team does not own WinPE, they only use it for purposes of TA
and
TAP.exe to deploy XPE... might try something along the lines of
microsoft.public.windowsxp.setup_deployment... not sure if that's the
right
one either, but might be worth a shot...
That being said, I have not personally tried to get WinPE to boot from a
HDD. I have yet to run into a scenario where the CDROM won't work, or
that I
would need to boot from HDD... The OPK may allow you to setup some fun
stuff
to make it work, but no guarantees. :-)
HTH, JC
--
John Coyne
eMVP
Windows Embedded Black Belt
Arrow Electronics, OCS division
When replying directly to this message remove the NOSPAM_ from the
address
"Michael M." <MichaelM@discussions.microsoft.com> wrote in message
news:78792AE2-DD3D-49EC-9F9A-D9F3D638603A@microsoft.com...
What is the process to boot WinPE from a Hard Disk partition other than
C
partition.
(i.e. an active partition E) without using Command Console (cmdcons)?
|
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in